Getting Started
First Steps:
Install and download the driver. We strongly recommend following the step by step setup instructions below. Having this page open on a phone or pc will walk you through all the steps.
We also have written instructions at "installation instructions"
The following are just the basic instructions:
Click the button "Windows Download" on a windows laptop or PC. Read all instructions before doing anyhting else.
Go to downloads and find a zipped file called MICLIGHT Setup.
Right click and select extract here.
Open this new folder (MICLIGHT setup)
Right click on the file inside (MICLIGHT setup.exe)
Click "Run as Administrator" (This is vital or program won't load up automatically when you shut down or restart your pc if you didn't do this uninstall MicLight.exe and start again.).
Click through the installation menu
(If you have an issue follow our detailed "installation instructions").
It should flash one single time when you connect it to your turned on PC or laptop.
If it doesn't Click Won't Flash
Now wait a minute for the program to interface with the Mic Light.
Then either try a quick online call or go the toolbar in the bottom right and click on "Open Sound Settings" Then click test microphone and observe the blue bar moving (if no blue bar then check if you have a microphone connected)
The Mic Light should switch on this is how you show you installed and connected the Mic Light correctly.
If any difficulties with this check "Advanced Troubleshooting".
If you have a different issue try our Common Issues page.
Connect the MicLight:
Once the program is running connect the Mic light to the PC with the cable.
DO NOT ATTEMPT TO FORCE IN CABLE!
Cable should look like this.
